Magmaweld MG2 is unalloyed wire electrode for GMA (MIG/MAG) welding of general structural steels, pipes and cast steels by using CO2 or mixed shielding gases can be used depending on thickness of the base metal. Generally used in steel construction, shipbuilding, machine, tank, boiler production, automotive industry. Preheating is required, depending on the plate thickness and carbon equivalent of the base metal. A thin and homogeneous copper coating increases electrical conductivity and protects the wire from rusting.

Tabs

Specification

Classification
AWS A5.18:	ER 70S-6
EN ISO 14341-A:	G 42 4 M21 G3 Si1
EN ISO 14341-A:	G 42 3 C1 G3 Si1
DIN 8559:	SG2 CY 42 43

Typical Chemical Analysis of Welding Wire (%)

C	Si	Mn	Cr	Ni	Mo	Nb	V	N	Cu
0.08	0.80	1.45	-	-	-	-	-	-	-

Typical Mechanical Properties of All-weld metal

Heat Treatment	Shielding gas	Yield Strength N/mm2	Tensile Strength N/mm2	Elongation A5 (%)	Impact Energy ISO - V (J) -40°C	Hardness
As Welded	M21	430	530	28	55	-
As Welded	C	460	530	29	50 (-30°C)

*Chemical compositions and mechanical properties apply to the use shielding gas: EN ISO 14175 - C1 (100% CO2)

Materials

EN	DIN
S185	St 33
S235 - S355	St 37.0 - St 52.0
S235 - S355	St 37.2 - St 52.3
P235 - P355	St 37.4 - St 52.4
P235	St 35.8
P265	St 45.8
P235GH, P265GH	H I, H II
P295GH, P355GH	17Mn4, 19Mn5
P295, P335	St 50, St 60*
L210 - L360	StE 210.7(TM) - StE 360.7(TM)
-	StE 255 - StE 380
S(P)275 - S(P)355	StE 285 - StE 355
-	GS - 38, GS - 52
GP240R	GS - 45
-	A, B, D, E

Storage and redrying information

1. Should be stocked on top of the wooden pallets in dry room. (relative humidity < 50%, room temperature > 20°C)
2. Shouldn’t be exposed to high statical load and impact.

 

Current polarity: DC+

Product files

Piegādātājs

Magmaweld

Uzņēmums Magmaweld ražo metināšanas elektrodus un stiepli, kā arī metināšanas iekārtas, un tam ir daudzgadīga pieredze metināšanas preču tirgū.

www.magmaweld.com