Especially suitable for welding in sheets thinner then 5 mm, galvanized sheets and tubes, primer painted, painted and slightly rusty steels and in production of tanks and boilers, tube installations. Very easily operated in positional welding, including vertically-down. Good gap-bridging. Smooth arc, well suited for tack-welding due to its easy arc striking and re-striking properties. Possible to use equally well both with AC and DC. Welds are smooth, slightly concave and blending into base metal without undercutting. Slag is self-releasing.

Tabs

Specification

Classification
AWS A5.1:	E6013
EN ISO 2560-A:	E 38 0 RC 11

Typical Chemical Analysis of All-Weld Metal (%)

C	Si	Mn
0.08	0.45	0.60

Typical Mechanical Properties of All-Weld Metal

Heat Treatment	Yield Strength N/mm2	Tensile trength N/mm2	Elongation A5 (%)	Impact Energy ISO - V (J) 0 °C
As Welded	480	530	27	55

Materials

EN	DIN
S185 - S355J0	St 33- St 52.3
P235GH, P265GH	H I, H II
P295GH	17Mn4
P235TR2 - P355T2	St37.4 - St 52.4
P235G1TH, P255G1TH	StE 35.8 - StE 45.8
L210 - L360NB	StE 210.7 - StE 360.7
S255N - S355N	StE 255- StE 355
GE 200, GE 240	GS 38, GS 45
	AH 32, EH 36
	A, B, D

Storage and redrying information

Generally not required. If required, redry for 1 hour at 110°C.
It should be stored in a dry room (relative humidity < 50%, room temperature > 20°C) on wooden pallets.

Current polarity: DC- or ~

Product files

Piegādātājs

Magmaweld

Uzņēmums Magmaweld ražo metināšanas elektrodus un stiepli, kā arī metināšanas iekārtas, un tam ir daudzgadīga pieredze metināšanas preču tirgū.

www.magmaweld.com