FLUXOFIL 45 is a seamless copper coated basic flux cored wire for welding high-strength fine grain structural steels. Quiet and smooth running with low spatter loss and easy slag removal producing uniform and smooth beads which are free from porosity. The mechanical properties of the weld depend on the cooling conditions and are influenced by the heat input and interpass temperature..

Tabs

Спецификация

Classification
EN ISO 18276-A:	T89 4 Mn2Ni1CrMo B M 2 H5
AWS A5.29:	E120T5-GM H4

Chemical analysis (Typical values in %)

	C	Mn	Si	P	S	Cr	Ni	Mo	Nb	V	N	Cu
Wire	0.09	2.0	0.50	0.01	0.01	1.0	1.8	0.4	-	-	-	-

 

All-weld metal Mechanical Properties

Heat Treatment	Yield Strength N/mm2	Tensile Strength N/mm2	Elongation A5 (%)	Impact Energy ISO - V (J)			Hardness
As Welded	> 890	940-1180	> 15	> 47 (-40°C)			-

Gas test: 82% Ar + 18% CO2

Shielding Gas:  EN ISO 14175: M21

Materials: S890

Storage: Keep dry and avoid condensation

Current condition: DC+

файлы

Piegādātājs

Oerlikon

Koncerns Oerlikon piedāvā daudzveidīgu metināšanas materiālu, iekārtu un piederumu klāstu, un ir viens no vadošajiem Eiropas ražotājiem.

www.oerlikon-welding.com